Benelli Tre-K Amazonas 1130

Conceived to take you on any adventure, the TreK Amazonas 1130 is the answer to the “Go anywhere, do anything” motorcycle that today’s intrepid riders have asked for.

Photo Credits: Courtesy of Benelli

Conceived to take you on any adventure, the TreK Amazonas 1130 is the answer to the “Go anywhere, do anything” motorcycle that today’s intrepid riders have asked for.
To tackle every type of environments, the Amazonas is given extended suspension travel through an adjustable Sachs front fork and adjustable rear shocker, coupled with rugged spoked wheel rims and an array of optional factory touring accessories.
Whilst the Amazonas has an adventure “soul”, it still carries over the TreK handling characteristics and on road manners, befitting any sports bike and comfort of any sports tourer. Its streamlined design is that of a motorcycle born to travel and eat up the miles, thanks to a softer suspension, a longer 6th gear ratio, 3 way adjustable front screen and switchable power control setting for changing conditions.
The Amazonas comes with a 1130 cc three cylinder, producing 126 hp (92 kW) at 9000 rpm and 112 Nm (11.4 kgm) of pure torque at 5000 rpm.
Benelli offers the Tre-K 1130 in three colours, white, yellow and military green with a full range of factory accessories including: alumimium travel cases, side panniers, soft luggage, Tom Tom navigation and impact protection.

 

 

 

Source: Benelli

Technical Specifications Benelli Tre-K Amazonas 1130
Engine
Type In line 3 cylinders, 4-stroke, 4 valves per cylinder double overhead camshaft, with balancer shaft
Displacement 1131cc
Bore x Stroke 88 x 62 mm
Compression Ratio 11,6:1
Maximum Power 92,0KW (125,08HP) @9000RPM
Maximum Torque 112,0NM (11,42 KGF.M) @5000RPM
Cooling System liquid cooled
Lubrication System Wet sump
Fuel Supply System Electronic injection with three throttle bodies ø53 mm
Ignition System WALBRO ECUA-1
Starter System Electric
Transmission Type 6 speeds
Final Transmission System Chain drive
Clutch Type Wet clutch
Chassis
Frame Decomposable, front steel trestle, rear aluminum alloy casting
Front Suspension Ø48 mm upside-down fork, with hydraulic rebound / compression and spring preload adjustments
Rear Suspension Steel tube trestle swingarm, rear dumper with hydraulic adjustment (rebound) and spring preload assembled with progressive link
Front Break Twin floating Wave disk ø320 mm with radial 4 piston calipers
Rear Break Single Wave disk ø255 mm with double piston caliper
Front Tyre 110/80-R19
Rear Tyre 150/70-R17
Dimensions
Overall Length 2200 mm
Overall Width 850 mm
Overall Height 1340 mm
Seat Height 865 mm
Min. ground clearance 170 mm
Kerb Weight 240 kg
Fuel Capacity 21,5 liters

Subscribe to our newsletter

Stay on top of news!